BMW desktop wallpapers. BMW motorcycle wallpapers.
High resolution images, 1600 x 1200 pixels, free download.
Insurance and accident lawyers information
2003 BMW R 1150 R Rockster Edition 80
Specifications
Model: BMW R 1150 R Rockster Edition 80
Year: 2004
Category: Naked bike
Engine and transmission
Displacement: 1130.00 ccm (68.95 cubic inches)
Engine type: Two cylinder boxer, four-stroke
Power: 83.81 HP (61.2 kW)) @ 6750 RPM
Torque: 98.00 Nm (10.0 kgf-m or 72.3 ft.lbs) @ 5250 RPM
Top speed: 197.0 km/h (122.4 mph)
Compression: 10.3:1
Bore x stroke: 101.0 x 70.5 mm (4.0 x 2.8 inches)
Valves per cylinder: 4
Fuel system: Injection
Fuel control: OHC
Cooling system: Oil & air
Gearbox: 6-speed
Transmission type,
final drive: Shaft drive (cardan)
Fuel consumption: 4.60 litres/100 km (21.7 km/l or 51.13 mpg)
Greenhouse gases: 106.7 CO2 g/km. (CO2 - Carbon dioxide emission)
Chassis, suspension, brakes and wheels
Frame type: Three-section composite frame consisting of front and rear section, load bearing engine.
Front suspension: BMW Motorrad Telelever; stanchion diameter 35 mm, central strut, rebound damping adjustable
Front suspension travel: 120 mm (4.7 inches)
Rear suspension: Die-cast aluminium single-sided swinging arm with BMW Motorrad Paralever; central strut, spring pre-load adjustable to continuously variable levels by means of hydraulic handwheel, rebound damping adjustable
Rear suspension travel: 135 mm (5.3 inches)
Front tyre dimensions: 120/70-ZR17
Rear tyre dimensions: 180/55-ZR17
Front brakes: Double disc
Front brakes diameter: 320 mm (12.6 inches)
Rear brakes: Single disc
Rear brakes diameter: 276 mm (10.9 inches)
Physical measures and capacities
Dry weight: 219.0 kg (482.8 pounds)
Weight incl. oil, gas, etc: 239.0 kg (526.9 pounds)
Power/weight ratio: 0.3827 HP/kg
Seat height: 835 mm (32.9 inches) If adjustable, lowest setting.
Alternate seat height: 845 mm (33.3 inches) If adjustable, highest setting.
Overall height: 1,097 mm (43.2 inches)
Overall length: 2,170 mm (85.4 inches)
Overall width: 920 mm (36.2 inches)
Wheelbase: 1,486 mm (58.5 inches)
Fuel capacity: 20.50 litres (5.42 gallons)
Reserve fuel capacity: 4.00 litres (1.06 gallons)
Model: BMW R 1150 R Rockster Edition 80
Year: 2004
Category: Naked bike
Engine and transmission
Displacement: 1130.00 ccm (68.95 cubic inches)
Engine type: Two cylinder boxer, four-stroke
Power: 83.81 HP (61.2 kW)) @ 6750 RPM
Torque: 98.00 Nm (10.0 kgf-m or 72.3 ft.lbs) @ 5250 RPM
Top speed: 197.0 km/h (122.4 mph)
Compression: 10.3:1
Bore x stroke: 101.0 x 70.5 mm (4.0 x 2.8 inches)
Valves per cylinder: 4
Fuel system: Injection
Fuel control: OHC
Cooling system: Oil & air
Gearbox: 6-speed
Transmission type,
final drive: Shaft drive (cardan)
Fuel consumption: 4.60 litres/100 km (21.7 km/l or 51.13 mpg)
Greenhouse gases: 106.7 CO2 g/km. (CO2 - Carbon dioxide emission)
Chassis, suspension, brakes and wheels
Frame type: Three-section composite frame consisting of front and rear section, load bearing engine.
Front suspension: BMW Motorrad Telelever; stanchion diameter 35 mm, central strut, rebound damping adjustable
Front suspension travel: 120 mm (4.7 inches)
Rear suspension: Die-cast aluminium single-sided swinging arm with BMW Motorrad Paralever; central strut, spring pre-load adjustable to continuously variable levels by means of hydraulic handwheel, rebound damping adjustable
Rear suspension travel: 135 mm (5.3 inches)
Front tyre dimensions: 120/70-ZR17
Rear tyre dimensions: 180/55-ZR17
Front brakes: Double disc
Front brakes diameter: 320 mm (12.6 inches)
Rear brakes: Single disc
Rear brakes diameter: 276 mm (10.9 inches)
Physical measures and capacities
Dry weight: 219.0 kg (482.8 pounds)
Weight incl. oil, gas, etc: 239.0 kg (526.9 pounds)
Power/weight ratio: 0.3827 HP/kg
Seat height: 835 mm (32.9 inches) If adjustable, lowest setting.
Alternate seat height: 845 mm (33.3 inches) If adjustable, highest setting.
Overall height: 1,097 mm (43.2 inches)
Overall length: 2,170 mm (85.4 inches)
Overall width: 920 mm (36.2 inches)
Wheelbase: 1,486 mm (58.5 inches)
Fuel capacity: 20.50 litres (5.42 gallons)
Reserve fuel capacity: 4.00 litres (1.06 gallons)
Motorcycle Accident Lawyer Florida Motorcycle Accident Attorney www.smithallenlaw.com A motorcycle accident can cause devastating injuries as well as property damage, to the motorcycle driver and to those involved. An accident attorney who specializes in Florida injury cases can help both the driver and riders if an accident case ends up in court. A motorcycle accident will be examined more carefully than if only cars were involved, because of the delicacy of the situation. The attorneys and court officials will be looking to see who is responsible for the accident, by interviewing witnesses, checking the evidence, reconstructing the accident scene, and talking to all of those involved. A reputable motorcycle accident attorney is essential to make sure that the rights of the victim are taken care of. An accident attorney will be responsible for two main factors: liability determination and compensation. Determining liability may be either easy or difficult. This will depend on the severity of the accident, whether there were witnesses, the weather, and other factors. Liability is the process of figuring out just who was at fault for the accident. Many drivers violate speeding and traffic laws, whether intentionally or unintentionally. If an accident occurred because the other person disobeyed a traffic law, there may be penalties for both parties involved. An accident attorney may have a very difficult job determining who was at fault in an accident. Many instances, both of the parties may be responsible for the accident that occurred. If this seems to be the case, then a study will be performed to see who shares the bigger fault, so as to determine who takes the responsibility. A thorough study of a motorcycle accident may need to be conducted to determine this, and will be done through both the accident attorney’s office and any insurance companies involved. An accident attorney will handle these cases with the upmost care and diligence, so that they have the most accurate information. Since every accident is unique, each study will be tailored to find out who will ultimately take the blame. An accident attorney will then turn their focus to compensation for the victim, after fault has been determined in the motorcycle accident. There may be many different damages from a motorcycle accident that will need to be taken care of quickly and efficiently. The biggest worry is bodily injury that may have occurred as a result of the accident. The driver of the motorcycle, any riders, and whoever else was involved in the accident may all have required medical attention. With the relaxed helmet laws, many cyclists do not wear helmets while they are driving, which can result in traumatic head injuries. An accident involving a motorcycle can easily result in severe injury and even death. Other aspects of compensation that an accident attorney will work for are damage that may have been done to property, such as to other vehicles, buildings or possessions. An accident attorney will also try to get lost wages and money for pain and suffering, if their client has lost work because of the accident. An accident attorney will also attempt to get all medical bills covered for their client, either through insurance or through a judgment. An experienced motorcycle accident attorney can present their case for an accident victim in order to get the best compensation possible. If you or a loved one gets into a motorcycle accident, hiring a professional accident attorney is the best course of action. No Recovery, No Fee! Call Today 1-800-426-8094 Speak to an attorney today free of charge. If you were injured in any type of accident, you should know your rights. Insurance companies have attorneys representing them, so should you. Call for your consultation today. |
No comments:
Post a Comment